1966 GMC 1000 - Making it Mine!

[jkalgren]

Originally Posted by Prowbar

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

Very nice work! A spot welder is the way to go, that’s how they did it at the factory. No rust above the windshield on yours? Mine’s pretty rotted out. What seam sealer are you using here? I’m taking notes!

The inside of the panel above the windshield was pretty rough, but no rust through... so I am hoping the Rust Reformer and paint took care of it. I was not prepared to replace that piece... this is not that kind of restoration!

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



The seam sealer was just something from Amazon that was cheap but had good reviews. Same with the primer for these individual repairs.... I will be buying some decent (but inexpensive) Kirker primer when I am ready to spray the whole cab.

Here are links to the seam sealer and primer I used.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?