GMC Dash cluster lens
 

New to the forum, so sorry if this has been covered already. I'm looking to make the idiot light lens covers and was needing help on confirming the correct colors and lettering on lenses.

Attached is a pic of what I'm thinking is the correct color and lettering.

Re: GMC Dash cluster lens
 

That looks fine, but it's black lettering instead of white. Unless you're going for something different.

Re: GMC Dash cluster lens
 

On my 65 the letters are white on the back side and they are completely white (no borders)
The hi beam, gen, and low oil have red lenses. The turn sig has an orange lens and is marked:

TURN
SIG

I had to make a new turn sig lens, and while I have made the lens, I haven't found a good method to create the lettering. How are you going to approach this?

Re: GMC Dash cluster lens
 

I'm in the process of machining a mold to pour these out of epoxy. Trying to get the correct colors. I will machine the letters into the mold that will be raised on the backside of the lens. That should make it easy to brush some white paint on the raised section of letters.

Thanks for clarifying the turn signal markings and color.

Re: GMC Dash cluster lens
 

I'd be interested in a correct turn sig lens, if you make a couple of spares.

Re: GMC Dash cluster lens
 

Turn signal lense color is green.

Re: GMC Dash cluster lens
 

Will do!

Re: GMC Dash cluster lens
 

all the lenses for the cluster are red except the turn signal which is green, according to the gmc parts manual.

Re: GMC Dash cluster lens
 

Sorry about the lens color, here is how mine looked when I bought it. It was melted from the heat, I guess a bad bulb or something.

Here is the low oil pressure lens. It gives you a good idea about the font used. Note they are painted on the backside, letters are mirrored.

The turn sig should actually have the words centered, like:

Re: GMC Dash cluster lens
 

Not a problem thanks for the help.