6066 (1960-1966) GMC Truck Club - 1960 gmc rear end type?

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)

- Transmissions and Rear Ends (https://6066gmcclub.com/forumdisplay.php?f=10)

- - 1960 gmc rear end type? (https://6066gmcclub.com/showthread.php?t=51180)

ZDADDY

July 28th, 2021 05:29 PM

1960 gmc rear end type?

Anybody know what rear end this is? Gear ratio? Options?

Its a 10 bolt

Thankshttps://uploads.tapatalk-cdn.com/202...0b373aa20a.jpg

Sent from my P027 using Tapatalk

jbgroby

July 29th, 2021 12:39 PM

Re: 1960 gmc rear end type?

1 Attachment(s)

Not sure, but if you get it cleaned up - you can paint it like this ;)

jbgroby

July 29th, 2021 12:43 PM

Re: 1960 gmc rear end type?

1 Attachment(s)

Check these.

ZDADDY

July 29th, 2021 10:42 PM

Re: 1960 gmc rear end type?

Quote:

Originally Posted by jbgroby (Post 74407)

Not sure, but if you get it cleaned up - you can paint it like this ;)

That is sick!!!!

Sent from my P027 using Tapatalk

Funky61

July 30th, 2021 12:41 AM

Re: 1960 gmc rear end type?

Hi ZDADDY;

from what I have read, you have an Eaton HO32 differential that most commonly had the 3:90 ratio but also rarely came with 3:38's

ZDADDY

August 3rd, 2021 02:11 AM

Re: 1960 gmc rear end type?

Quote:

Originally Posted by Funky61 (Post 74418)

Hi ZDADDY;

from what I have read, you have an Eaton HO32 differential that most commonly had the 3:90 ratio but also rarely came with 3:38's

Evidently the 2
Piece driveshaft on the truck had been modified, and the Eaton Ho32 rear end is suspect. Any suggestions on a rear end I can put in with little to no modification? Will just have to get a driveshaft built.

Thanks
Zdaddu

Sent from my P027 using Tapatalk

All times are GMT +1. The time now is 11:16 PM.