'63 Suburban mid-body mounts
 

I have unearthed the remains of the original floor in my ride, which had been covered with plywood to reinforce the rooted out areas. The plan is to cut out the affected area and weld in a fabbed match. My question today is the large round washer body-suspension mount area, one of which is seen in the photo. There is NOTHING in them, top or bottom. But there doesn't seem to be a hole that goes all the way through either. I have looked at the supplemental manual but it doesn't explain to me what I need to do. Suggestions?

Re: '63 Suburban mid-body mounts
 

This thread has lots of information about Suburban body mounts from the 67-72 forum. Members Lewis Matkin and Ron (Padresag) contributed part numbers to it as well as others with links and part numbers.

http://www.67-72chevytrucks.com/vboa...mounts+cushion

Re: '63 Suburban mid-body mounts
 

That has just the info I need, thanks!