![]() |
New Guy here. 1962 4wd Rescue Suburban Rebuild Parts Numbers Needed
1 Attachment(s)
I wrote another post and its disappeared, so ill try again. I have recently acquired a 1962 GMC 4wd rescue truck, last ran 2016 but they could never get the clutch and brakes fixed at local shops, i have bought the truck and i would like to know where i can get these parts, i don't want to rebuild if at all possible. I want to start with the master cylinder and brakes. then put a pertronix in it if anyone has that part number. here's a picture of the rig. Thanks
|
Re: New Guy here. 1962 4wd Rescue Suburban Rebuild Parts Numbers Needed
when I was going through my hydraulic system NAPA had the kits as well as new replacements wheel and masters for my 62 truck.
|
Re: New Guy here. 1962 4wd Rescue Suburban Rebuild Parts Numbers Needed
Welcome to our forum! Looks like you managed to acquire an awesome piece of history. We'll be looking forward to hearing more about it and seeing more photos too.
Assuming you still have the original 305D V6, the Pertronix Ignitor you need is number 1164. It's a simple and well-worthwhile conversion. I've done several of them. |
Re: New Guy here. 1962 4wd Rescue Suburban Rebuild Parts Numbers Needed
Welcome to the forum!!!!! If you need any part #'s i can furnish them as well as substitutes i have come across over the years. Great truck and good luck! Btw, i recommend dot 5 brake for our vehicles especially if they aren't driven much after repair. Dot 5 fluid doesn't absorb water from the air like dot 3 & 4 do, and being silicone, is a great lubricant for the brake & clutch system on your truck.
|
Re: New Guy here. 1962 4wd Rescue Suburban Rebuild Parts Numbers Needed
Lewis,
RE: DOT 5 Brake Fluid... I have never used it, because I have never had a need to have complete brake system apart , all at one time. It has been my understanding that a complete flush must be done before converting to the DOT 5 fluid, due to incompatibility issues. Am I wrong? I do not have anything to reference at this time, but I just don't want somebody to start adding DOT 5 to an older system if it will cause problems. Hopefully it is not an issue and my recollection was faulty. Rod J Issaquah, WA 1970 RM-7500 401M |
Re: New Guy here. 1962 4wd Rescue Suburban Rebuild Parts Numbers Needed
Quote:
|
Re: New Guy here. 1962 4wd Rescue Suburban Rebuild Parts Numbers Needed
Quote:
|
Re: New Guy here. 1962 4wd Rescue Suburban Rebuild Parts Numbers Needed
Quote:
|
Re: New Guy here. 1962 4wd Rescue Suburban Rebuild Parts Numbers Needed
We7x you are right. I didn't make myself clear about dot 5. I assumed (the wrong thing to do) that a total rebuild/replace was what was going to happen. Thanks for keepin' me honest!
|
Re: New Guy here. 1962 4wd Rescue Suburban Rebuild Parts Numbers Needed
1 Attachment(s)
Quote:
Attachment 7897 Sent from my iPhone using Tapatalk |
All times are GMT +1. The time now is 08:58 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.