66 351E Rebuild Questions and Part needed
 

I pulled my stuck 351E. Honed the bores, looks good. New standard rings installed. Need a camshaft cover mine is rusted. I got gaskets from Olsons, the head gaskets are for a 401, they are 5 inches (piston size) my 351 is standard at 4 9/16. Will the gap cause an issue?
My truck is from Washington State, Auto, ps, pb, custom cab, with chrome grill and bumper. thanks guys. Chris

Re: 66 351E Rebuild Questions and Part needed
 

Gasket is fine. How much did Olsens charge? The cover should be easy enough, I have some, I am in kansas you might find one closer to home.

Re: 66 351E Rebuild Questions and Part needed
 

Gasket is fine. How much did Olsens charge? The cover should be easy enough, I think they are the same as 305, could be wrong, hopefully someone will correct me. I have some, I am in kansas, you might find one closer to home.

Re: 66 351E Rebuild Questions and Part needed
 

If I could get a cover that would be great. Send me a message on cost. Olson's charged $430 for a Head set.

Re: 66 351E Rebuild Questions and Part needed
 

Sent PM