64 suburban glass
 

I need a second row pass. side fixed portion of the sliding window. I am in the Kansas City area. Bob

Re: 64 suburban glass
 

Bob --

You should give Tony Smith a call. Check out his website at http://www.4-5-6chevytrucks.com/ Tony drove all the way out here to Southern Oregon a few years ago to buy a '65 GMC big back window pickup from me. I sold him some fenders and a couple of hoods too. His brother Mike lives here in Medford. Mike has a sheet metal and welding business here. Nice people!

Re: 64 suburban glass
 

Thanks, I will try them again, I called and left a message, and emailed twice and have not had a response, they must be really busy.Bob

Re: 64 suburban glass
 

If you need just glass, make a template and go to any glass shop. Don't need to go to an automotive glass shop. Maybe you are not talking about glass, maybe you need the frame. I'm not sure? Your topic says glass, but post says "...portion..."????

Re: 64 suburban glass
 

thanks it is the glass that I need. Bob

Re: 64 suburban glass
 

Buy some 1/4" material at home depot (osb or better) and use that to make a template. I did that on an earlier suburban. Drill some holes in it for your fingers. I made the template and installed it with the rubber just like it was glass, to be sure it was correct. Then took to glass shop. Be sure to mark on it that the finger holes are NOT TO BE INCLUDED! Or if you have a loose piece of correct glass make a template from that or give glass to them. Maybe Tony has templates or glass for you. Original glass was 1/4, new glass is 6mm...close enough.
Note: My project (56GMC carryall) was installing all one piece solid windows. No leaky-leaky, no rattle-rattle, no latches needed, tinted, looks cool albeit not orig. Just google 1956 GMC carryall and my Nassau Blue 4x4 will come up and you can see the solid side windows.

Re: 64 suburban glass
 

Thanks. I will try that. Bob