305e pistons
 

i am new here and hoping for help locating pistons for my 1966 k1000 with a 3054e. my local machine shop is having a hard time finding them. thanks for any helpful advice.

Re: 305e pistons
 

What size overbore piston will you need? One of our former members had a source for V6 pistons in Sacramento Cal. I will try to get a hold of him and see what we can come up with.

Re: 305e pistons
 

the block is not bored yet. i am trying to find out what sizes are availible before boring. thank you for your help

Re: 305e pistons
 

The machine shop will want the pistons in hand before they bore the block. I have a set of oversized pistons, no rings, if you are interested I will check on the size, just let me know.

Re: 305e pistons
 

hi

just wanted to share what I had to do to get pistons for my V6 rebuild the past winter of 2013 and 2014

ordered brand new pistons from Ariss Pistons in California , they make them from scratch as they specialize in racing pistons

they come with 4 rings per piston precisely measured, not cheap of course, but awesome pistons for a tired old block that needs them

they have all the specs in file for the V6 GMC engine

Re: 305e pistons
 

I've known of Arias being a custom piston manufacturer but not heard of Ariss?

Re: 305e pistons
 

hi again

yes it is Arias Pistons in California misspelled there name

cost as a little less than 1000$ with rings and wrist pins, I used 30thou over

hope this help others that may need pistons JM

Re: 305e pistons
 

hi clyde, sorry for the late response i have been on vacation for the past week. I am looking for 030 or 040 oversize. let me know what you have and how much you would want for them.

thanks,:thumbsup: matt

Re: 305e pistons
 

thanks for the info on the ariss pistons.