Full Gauge Cluster
 

I just purchased a full gauge cluster for my 63 GMC 1500 2wd. (Sun tachometer, Bat o meter, temp, fuel, speed o gauges) I'd like any sugestions about where send them to have them rehab'd.

Also, I am in the process of pulling the engine (305E) for a complete rebuild. If I replace the points ignition system with electronic ignition, can I still use the original Sun tachometer?

Re: Full Gauge Cluster
 

I'm the one you bought it from!!! Anyway the suggestion I proposed was for me to build you an entirely new circuit board to fit inside the transmitter box and eliminate the antiquated components and batteries. Pete Chronis Northern Cal. 68 GMC K-2500 478M V6

Re: Full Gauge Cluster
 

Joe's question does bring up a good point. If, for some reason, you want to keep the original transmitter internals (and yes, I know about the mercury batteries), will it work with electronic ignition?

Ray

Re: Full Gauge Cluster
 

Pete or Joe can you post a photo of the cluster?

Re: Full Gauge Cluster
 

Rustbucket, You can go to Jolly's site and look under "Stock Instrument Custer ID" then scroll down and you will see my instrument clusters. The one with the Tach and Bat-O-Meter now belongs to Joe, the other one has a clock and Bat-O-meter. Both have the proper placement on how the factory or dealer installed the optional gauges, Send me your email address and upload and email you the full blown pics of each cluster as well as othe optional gauges that were installed on 64-66 trucks on the left of the ashtray.

Re: Full Gauge Cluster
 

There is the link to the ~~~> Stock GMC Instrument Cluster
Page.

Re: Full Gauge Cluster
 

Hey bigblockv6 - sorry to resurrect this old post, but I checked the Jolly's page and I don't see pictures of optional gauges installed left of the ashtray. Can you point me in the right direction?

Re: Full Gauge Cluster
 

Nothing wrong with resurrecting my post from the past, I love talking about these gauges. Those were both my Clusters on Jolly's site then I sold one on ebay then it turns out to be one of our members. The gauges that are left to the ashtray I do have an illustration of one in a 1966 GMC owners manual for 4000 and up series. I'm going to have to dig it up this weekend when I get home. There should be a pic of one of these gauges on Jolly's site and it's a Voltmeter which I have. The idea of this smaller voltmeter mounted left of the ashtray allows you to have the two larger gauges like the clock and Tach and no need to run a Bat-O-Meter since all it is a voltmeter:lolsmack2:

Re: Full Gauge Cluster
 

Yeah, my ash tray is centered above my radio opening (my truck did not originally have a radio, and someone added in an aftermarket version, butchering the dash. But anyway, someone also added 3 gauges. One is a duplicate of my OEM temp gauge in the cluster, which must not work, and then an ammeter and oil pressure.

Posted this in another thread but here it is for reference:
https://6066gmcclub.com/attachment.p...1&d=1520212421

Re: Full Gauge Cluster
 

Hmm, tried to post this already but it didn't "stick". The reason I ask is, my ash tray is centered above my radio, and to the left someone installed 3 small gauges. I didn't know this was ever done originally, so that's kinda cool. I also don't know why I need the aftermarket water temp, maybe the one in my cluster is broken.

I was thinking it'd be cool to at least get retro style gauges for these 3 spots. maybe one small clock, and then replacements for the oil pressure and ammeter.

https://6066gmcclub.com/attachment.p...1&d=1520212421