Re: 1966 GMC 1000 - Making it Mine!
To be able to work the cab correctly, I needed to take the bed off. I first tried just some crossed straps from the corners... and it was too much weight and started bending the corners... so I built some frames and c-clamped them to the bed and pulled the bed with my engine crane.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
With access to the frame, I figured I should clean it off and treat the rust.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
And with the bed out of the way... you can see the damage I wanted to get to on the back of the cab.
To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?
|