Re: Rear axle-parts identyfication
The list looks OK, needs a couple of changes:
The wheel seals are incorrect, you need the 2x the NATIONAL 455860 or SKF 23844.
Look for Spicer 60-1 axle, this is the same as Dana 60 axle that you have. The 60-35 is a different axle, do not order parts for this axle.
I always reused the axle flange gaskets, they should be aluminum and easy to clean up and reuse. Measure yours to make sure you order the right ones.
You only need 1 pinion seal, but if yours does not leak do not change it out.
National is a quality brand for seals. The pinion is where the driveshaft connects to.
Wheel cylinders look fine.
The trick with Rockauto to try and order everything from 1 location. This saves on shipping costs.
Good luck!
|