Quote:
Originally Posted by Hagen
Update: The seal from Amazon ( National 413246 ) looks to be the same size all but for the width. Part of me thinks its unusable but I'll leave that to you pros. The original is roughly just under a half inch (.468 inch). The new National is .375 inch. Is this completely fine?
|
I don't believe the thickness of the seal will have any effects on sealing. As long as the OD and ID is correct it should work, that is where the sealing need to be. Install the seal flush with the front of the timing cover and install the cover. Be sure to Scotch-Brite the hub sealing surface and coat it with oil before installation.