Re: Name this part
Thanks for the response!
1)This seal came from behind the dampener? That sits in the end of the crank. It was flush with the timing cover.
2) I think I chewed the numbers. Don't see them.
3) with the way it is right now with no rubber inside the inner diameter is 2 and 1/2 in. The outer diameter is 3 and 1/4 in. 1/2 in. Height
4) Rock auto and partsgeek 9845 national , CR 17286
I have seen that thread before that you linked. Sadly those are no longer available after 2 clicks. I will be doing a deep dive into the site more tomorrow! Great stuff
Hagen
Last edited by Hagen; August 8th, 2024 at 07:06 AM.
Reason: Really bad
|