View Single Post
  #27  
Old July 6th, 2024, 07:40 PM
Funky61's Avatar
Funky61 Funky61 is online now
-= Dues Paid =-
 
Join Date: Jan 2013
Location: Corona, CA
Truck: 1961 Suburban 1962 GMC Utility
Posts: 1,193
Thanks: 48
Thanked 21 Times in 16 Posts
Rep Power: 431
Funky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really niceFunky61 is just really nice
Default Re: 1966 And Later Fuel Pumps

I will be using this Made in the USA Facet model FAC-40007 in line with the mechanical pump, along with a primer button as mentioned by Ed Synder.

Facet Cylindrical 12v Fuel Pump, 1/4 NPT, 4-5.5 psi


Brand: Facet-Purolator

For higher fuel volume requirements of engines above about 150 horsepower, the high-performance Facet Cylindrical pumps can deliver. Pumps can also be combined in series or parallel to achieve any required pressure or flow. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Facet pumps are compatible with gasoline, alcohol blends (up to and including E85), diesel, biodiesel, and fuel additives.

Maximum fuel delivery 36 gallons per hour. Maximum pressure 4 to 5.5 psi. Typical flow 23 gallons per hour at 2 psi. 1/4 NPT female ports. Negative ground (12v) only. This pump features an internal 74 micron filter.

This pump does not have an anti-siphon valve, so fuel can flow through when the pump is turned off. Facet part number 40007(E)*. This pump can also replace Facet pump numbers 40134 and 40220.


__________________
1961 GMC Suburban 305A Overdrive
1962 GMC Utility 305D
Reply With Quote