Throw-out/release bearing updated numbers. The "
known good parts" page needs updated, so here is some current info.
my throw out bearing died on me, so I had to search for a new one. There are two kinds: Long and Short
Short: #614018 This number is used by many manufactures like Delco and National. Prices range from $11 to $45 ($67 at NAPA) for the same part.
- Bore 1.3775"
Face 2.76" this is the part that touches the fingers of the pressure plate
Height 1.252"
Long #1625 or NATIONAL G
1625C
- Bore 1.3775"
Face 3.0625"
Height 1.699"
Just measure the face of your old one to tell which one you need. Mine is the short one and seems to be the common one. I was able to find it in town at all the major parts stores and of course Rock Auto. Rock Auto has some of the long and short descriptions wrong, so just go by part number and the dimensions.
___
other clutch info
---
11"Disk: none of the numbers on the
"known good parts" page work anymore.
Nobody has this. As of now the only options are to get yours rebuilt or have a new 12" disk modified (flip it around. see post above)
---
12" pressure plates are easy to find, but it seems like you need to get the whole kit for those and the disk will not work out of the box and will need to be modified. The good news is the kit I bought had the short clutch release bearing and the pilot bushing would fit as well. It seems all the kits come with the short throw-out and a disk that won't work.