[Prowbar]

Here are the installed H4 lamps. I bought them from a fellow that sold these lamps to be used in American cars with sealed beam lights. Unfortunately they are of crap quality, made by Autopal in India. I have to modify them, remove the built in parking lights. Also he supplied 4 regular beam instead if 2 low and 2 high beam. This is needed to properly install them in the mounting bezels. The spacing for the 3 prongs mounted on the back of the light is different on low vs high beam so they don't interchange. Aka this had to be modified.

Anyway, cleaned all the connectors out first and installed everything with a dab of dielectric grease and all worked the first try.

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



Also received my new repro bedsides and panels. Very excited to have them. The boxes got a little wet during transportation but the moisture never touched the panels. They look really good. After the frame paintjob and brake lines the bed can be build up on the truck.