May 25th, 2021, 06:30 PM
|
|
Junior Member
|
|
Join Date: Apr 2021
Location: Ozark, Arkansas
Truck: 1962 series 1000 pickup
Age: 75
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 32
|
|
Re: 63(may be '62) Build
Ok, back to brakes. The front and rear are most definitely not the same! Contrary to all the suppliers I have researched, the rears are ofset about 3/16 - 1/4". As I said before, the stud holes are larger too.
So, careful inspection shows the shoes will be flush with the drum edge. I see no option except drill the holes and press on (unless someone has a source for the correct drums) . No reduction in braking surface.
Hopefully the pictures make sense... the white paper was added to highlight the gap.
Bob
|