[FetchMeAPepsi]

***pause***

I forgot to mention that when I change my oil I take some of the old oil and refill the oil-bath breather over the carburetor. If you're following along, don't forget that step!

***play***


With all the parts in place we took off the breather cap



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Stuck the funnel in the hole...




To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







and then Powder Puff poured oil all down my arm.

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Because it takes 6 quarts and one jug is only 4, we emptied the first jug into Cecilia then filled it up to the 2 quart mark from the other jug.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







You can see how full it is from this handy window.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







We poured that in, then wiped Cecilia's chin. ****BURP!!***



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Powder puff put the cap back on while I jumped in to start her up and circulate that new oil.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







I had forgotten that I had the hub apart. Guess what I always do when I jump in any vehicle?

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?







Pump the brakes.

Without any drum on them at the moment.

Brake fluid squirted everywhere.



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?




I had a heck of a time getting the spring off the brake shoes off but by prying the spring off I was able to fix it. I reached in and poked the rubber innards back inside the brake cylinder. Then I slipped the piston back in, finally I put the rubber boot back on. Hopefully it'll still work. We'll find out when the hub is fixed.


No pics of all that because I was scrambling like an idiot to get it back together.

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

Sorry guys.

I did finally get in and start her up. Purring like a tiger! (pic taken with key in ACC position, so oil light is on - dont freak out!)



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?





With that done I can focus entirely on the hub parts issues.

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?