Re: 1962 GMC 305V6 4WD Slow DD Build - Cecilia (Pic Heavy)
Quote:
|
Fetch,
You need to get the 2 snap rings off before you need the socket for the spindle nuts.
Take a look at the yellow arrows on your pics. They are pointing to where the snap wrings are.
The larger diameter one is the outer one and can be removed with a flat blade screw driver.
The inner one (around the axle shaft stub) will need a set of snap wring pliers.
I hope this helps some.
Jonathon
|
Thanks Jonathon! That did the trick. It was covered in rust and almost invisible. (yes, I feel pretty dumb right now) I got it off with a screwdriver but my hub is still stuck on. I tapped it with a hammer and it still didn't budge. Spanner wrench time?
__________________
Step by steps:
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.
__________________
If the women don't find you handsome, they should at least find you handy.
|