April 28th, 2014, 03:02 AM
|
|
Junior Member
|
|
Join Date: Apr 2014
Location: Copperas Cove, TX
Truck: 1962 K10, 1965 C10, 1972 K25
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0
|
|
Re: 1962 GMC 305V6 4WD Slow DD Build - Cecilia (Pic Heavy)
Fetch,
You need to get the 2 snap rings off before you need the socket for the spindle nuts.
Take a look at the yellow arrows on your pics. They are pointing to where the snap wrings are.
The larger diameter one is the outer one and can be removed with a flat blade screw driver.
The inner one (around the axle shaft stub) will need a set of snap wring pliers.
I hope this helps some.
Jonathon
|