[BarryGMC]

Ok. Fetch here is some more. When you get the spindle nuts and brake drum off you will have the wheel Hub. That's what the wheel bolts to. You will pull this off. Please don't let the outer bearing fall in the dirt. Then you will see something like this. The first pic in my previous post. Remove the bolts. It may have studs with nuts. Remove the nuts. Lay the brake backing plate on the spring and remove the spindle. You may have to whack it to get it loose. Use a dead blow hammer or a piece of wood or brass if you use an iron hammer.. Then you will be meet with a mess like this. Don't stress out by what you find. It will be ugly. Next we will walk through the rest. Soccer starts in 6 minutes. Got to go. Barry