[GMCDAC]

Hey Fetch, I will get pics of those brackets as soon as I won't get frostbite taking them!

Yes that is what I need to do with the belts in the '55 build a plate or strap to spread the support further around the floor board rather than relying on washers. Since I used different seats I had to build a completely different tilt mechanism for the passenger side seat in my '70 Jimmy. That required some floor reinforcement too.

Seat belts can go bad with time, as the webbing and the stitching can deteriorate through the years. In racing, even at a local level you must replace all your belts every 2 years and some tracks are every year. If they were in a hard wreck re-using them is prohibited too. I've got a pile of out dated racing belts laying around here, no idea why---------.

I haven't had time to update my truck thread but since we talked about it here I will throw in a pic of the belts as I found them in my '55 when I pulled the front seat for the first time. The year is visible on the closest one.

DAC