Help with numbers on my 401
 

Finally getting started opening up my 401. It came out of a "New Idea" harvester, that's all I know.

Here's some pix of the numbers I've found on the top of the bellhousing. Will post more when I can get to the front of the engine.

Questions: is it a 401? any idea what year?

Re: Help with numbers on my 401
 

Check the Intake manifold and the exhaust manifolds as they should be dated and that may give you an idea

Re: Help with numbers on my 401
 

Third pix in OP shows the numbers on the intake manifold.

Any help?

Re: Help with numbers on my 401
 

That looks like the rear portion behind the carb area. I have similar numbers on my 401.

Here is the driver side front pad that shows the firing order and a date


New Idea Harvester repowered section from Jollys Page
http://6066gmcguy.com/V6powered.html

Re: Help with numbers on my 401
 

Pix shows entire intake; only numbers are the ones in the closeup and the firing order on the other side.

Re: Help with numbers on my 401
 

It could be a 401, but not a magnum based on the intake manifold but,

The numbers you have in your first picture are the same stamped on my
401M: CWG4 2476579

So it may very well be a 401.

Here is what I have stamped on the front engine pad just below the right-side head.

Re: Help with numbers on my 401
 

I'll try and get to the front end tomorrow and see what I can find.

Thanks for the help!

Re: Help with numbers on my 401
 

You're welcome and since the intake is off post a photo of the head passages to see if they are magnums.

https://6066gmcclub.com/album.php?albumid=107

Re: Help with numbers on my 401
 

Here's the stamped numbers on head and good closeup of ports.

Couldn't get real clear look at numbers but it's a 401!

Re: Help with numbers on my 401
 

Here is a link for 401 piston .030" oversize:
https://www.ebay.com/itm/18690188526...5269&recoPos=1