6066 (1960-1966) GMC Truck Club

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)

- Wheels, Tires, Suspension and Brakes (https://6066gmcclub.com/forumdisplay.php?f=23)

- - Two Post Lift (https://6066gmcclub.com/showthread.php?t=50993)

62Burb

November 19th, 2020 10:26 PM

Two Post Lift

The Driver's Manual for my '63 Suburban dictates that the jacking points are under the lower control arm, and the rear axle. I'm interested in getting a two post lift, and trying to figure out how to span that distance (about 10 feet) with support arms. Anyone done this? The C Channel frame already bears a bend where someone tried putting a jack under the side so that looks like a no-go.

James

November 21st, 2020 12:07 AM

Re: Two Post Lift

Personally I would see if the lift would go on the frame where there is a cross member. I believed it would be able to support the truck.

ilvracn

November 22nd, 2020 07:06 PM

Re: Two Post Lift

i have a 61 panel, i have had it on my two post several times. lift it from the frame not axle or controll arm

All times are GMT +1. The time now is 11:28 PM.