![]() |
Mechanical Tachometer
I had the opportunity to buy an instrument panel from a heavy duty GMC that would physically fit in my 1965 C1000. The panel has a mechanical tachometer, and I would swap out my speedo. My question is this: does anyone know of a distributor for the GM 230/250/292 that supports a mechanical tachometer?
|
Re: Mechanical Tachometer
I have not heard or seen those but I found this company on the net. Seem to have been around awhile so they may know or maybe build you one for that purpose.
https://www.dicksspeedotach.com/tachometer-repair/ |
Re: Mechanical Tachometer
I will check them out. Thanks.
|
Re: Mechanical Tachometer
I have a Mallory distributor in one of my vehicles with a mechanical tach drive, so I know they make one for a Chevy. You could check to see if they have a listing for our GMC.
|
Re: Mechanical Tachometer
Mallory makes a few for sbc's, but if they made one for the 6 in the past, they do not now. Plenty of options for a Ford 292, but none for the good 292.
|
All times are GMT +1. The time now is 07:42 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.