Harmonic balancer
 

Parts needed for 1963 305E Harmonic Balancer ?? any suggestions Thanks JM

Re: Harmonic balancer
 

No balancer just a flanged hub.

Flange behind the pulley

Re: Harmonic balancer
 

Thanks Funky61 any idea if these make noise when bad?? know where to find?? thanks again JMF:signthankspin:

Re: Harmonic balancer
 

Not sure about the noise unless its split and is vibrating/rubbing.
You can post up down in the wanted section if you need that specific part.

Here is a CL Ad that has some nice parts on it. I don't think your that close but I'll post it.

https://sierravista.craigslist.org/p...090522022.html

Re: Harmonic balancer
 

Since there is no harmonic balancer, and it is a flange secured by a center bolt to the crankshaft, there would be no reason for this particular component to make any noise whatsoever, unless it was not properly installed and improperly secured to the crankshaft. If your engine was properly maintained, you should hear no abnormal noises, such as a rod or main bearing knock from your engine, except for the normal clicking of the rocker arms, due to the fact that these engines were equipped with solid valve lifters. Any other abnormal noise coming from these engines would indicate a more serious problem.

Re: Harmonic balancer
 

Thanks for info, still looking for noise origin, process of elimanation. jmf:ok:

Re: Harmonic balancer
 

Noise rattle was not flange , appears to be alternator bearings. Thanks for info on pully helped me to look else where. just ordered rebuilt Delco remy.