64 gmc steering column issues
 

I have some serious flop in my steering wheel. needs lower bearing I'm guessing. horn does not work nor do the turn signals. I read somewhere that the 64 gmc uses 62 or 63 chevy column parts. is that correct? what parts do I need to order and where should I get them from to fix these issues? thanks

Re: 64 gmc steering column issues
 

Semi-random question.... other than the flop in the steering wheel, does the vehicle track straight? Or does it drift to one side?

Re: 64 gmc steering column issues
 

fairly straight. never paid much attention to it honestly. it's on a k10 frame with 33" tires

Re: 64 gmc steering column issues
 

http://uploads.tapatalk-cdn.com/2017...167341b23e.jpg


Sent from my iPhone using Tapatalk

Re: 64 gmc steering column issues
 

https://vimeo.com/197896302


Sent from my iPhone using Tapatalk

Re: 64 gmc steering column issues
 

Id guess your upper bearing in shot or missing. Go to Jolly's site and read up on the troubleshooting the turn signal switch. The switch holds a the upper bearing. There was a guy in the "chevytalk" forum that sold rebuild kits for manual steering boxes. (I think he went by "Jalepeno")

Re: 64 gmc steering column issues
 

thanks

Re: 64 gmc steering column issues
 

I would take it the steering wheel off to make sure the hardware is tight and nothing broken. Ebay has some turn signal switch for sale.

Re: 64 gmc steering column issues
 

Are the Chivy and GMC turn signals the same? Just curious. I have seen the cams advertised as for use in both makes.

Re: 64 gmc steering column issues
 

from what i've been reading the 64 gmc uses a 63 chevy turn signal parts. hopefully someone more knowledgeable will chime in