6066 (1960-1966) GMC Truck Club

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)

- General Discussion (https://6066gmcclub.com/forumdisplay.php?f=8)

- - 1961 GMC Half Ton (https://6066gmcclub.com/showthread.php?t=47851)

Liltfy

October 25th, 2013 05:58 AM

1961 GMC Half Ton

New Guy... Hi all. I'm putting back together a 305V6. With new std bearings installed I found the mains had .002 gap and the rod ends were .002 to .003. I'm not racing or a performance freak. Just wondering if within spec to run ok....

Thanks!

FetchMeAPepsi

October 25th, 2013 08:25 PM

Re: 1961 GMC Half Ton

Welcome to the club! You might have better luck in the 305v6 section on the specs. Wish I could help but I'm not there yet.
:goodluck:

All times are GMT +1. The time now is 12:16 PM.