Re: What did you do for your GMC today?
 

You could do it cheaply like a trailer deck and hit it with linseed oil every spring. Keeps the nice wood grain showing and protects against the ugly of the world. takes about 15 minutes every April.

Re: What did you do for your GMC today?
 

Thanks so much, that assortment of unique and fine vehicles belong to my buddy. His Spyder has a neat story behind it as well, and yes it is a James Dean commemorative, right down to the dull toned numbers on the rear lid. He found it in the Carolina’s. He also finished buffing out my ‘63...forever grateful!!https://uploads.tapatalk-cdn.com/202...43efed3923.jpg



https://uploads.tapatalk-cdn.com/202...fea9417b2b.jpg


Sent from my iPhone using Tapatalk

Re: What did you do for your GMC today?
 

On a different note, in autozone today looking for a suitable 5W-30 for the ‘63, 305 V6. Realized practically all oils now are “fully synthetic” or “synthetic blend”. Curious what you guys are putting in your K1500’s out there these days?


Sent from my iPhone using Tapatalk

Re: What did you do for your GMC today?
 

Some of us are using Shell Rotella oil, looking for it that has zinc in it, helps protect the flat tappets. Most of the new oils are designed for newer motors with cat converters and roller tappets, so all the good stuff for older motors is not there any more.
Since then in some other cars I started using a Lucas Hot Rod classic oil from Summit racing, has a high zinc content labeled on container, designed for flat tappets motors.

Re: What did you do for your GMC today?
 

Ok, I’ll check it out, thanks so much! I understood the same thing about the importance of Zinc in the oil. Unfortunately I’ve discovered most oils don’t list their contents anymore. I’ll see if I can find the two you suggest somewhere. Thanks again!


Sent from my iPhone using Tapatalk

Re: What did you do for your GMC today?
 

It seems like this question comes up about once a year. I've been using Amsoil products since 1974, and have always had good luck with them. Their Z-Rod oil has high zinc, and is available in 10W-30, 10W-40, and 20W-50. I use 10W-40 myself.

See https://www.amsoil.com/p/z-rod-10w-3...A#pills-home_0

Re: What did you do for your GMC today?
 

For the slowest build known to man, I'll be installing my brake booster and new master cyl, looking for that radiator is next. Maybe by summer's end i'll be road worthy?

Re: What did you do for your GMC today?
 

Pshaw, all trucks are roadworthy if your hill is tall enough! About the radiator, i saw a four tube aluminum one on Ebay not too long back. They don't call it four tube though. I forget what it was they say, but it's got four hoses running along it where our original brass ones were only three tubes.

Good luck with the master cylinder and booster :thumbsup:

Re: What did you do for your GMC today?
 

dumped a little gas in carb. fired right up. drove to walmart, bought 3 boxes of freeze pops, just need to wash, check tires, ready for 4th of july parade.:grillin:

Re: What did you do for your GMC today?
 

I just ordered 30W Valvoline racing high zinc from Auto Zone was using 10W30 Valvoline racing conventional oil. jmf:thumbsup: