Re: After 5 years sitting running again! NEED MUFFLER
 

Does that one on Ebay you bought 2 of bolt up and fit? If it does, YOU might be the sealer!

It looks like it has open contacts on the back. Just plug it in, seal the plug up with silicone, and that should get you done. If you can't seal it with silicone, buy a 3.00 tube of dielectric grease and schmear it over the exposed contacts. Boom done.

Re: After 5 years sitting running again! NEED MUFFLER
 

Thanks Pepsi
Ya was a sailor so I guess I can be a Sealer!
Coming Tuesday gonna try it.
:)

Re: After 5 years sitting running again! NEED MUFFLER
 

Awesome! I'm going to keep an eye on this thread and see how it turned out. I will tell you to use a glove or rag if you use dielectric grease. You caint hardly wash that stuff off!

Good luck, sailor! :beer:

Re: After 5 years sitting running again! NEED MUFFLER
 

Well with Pepsi's encouragement I did give the silicon seal a shot. Came out very well though I won't know for a bit how watertight it is. I also put a good size ring of it around the area that goes through the firewall. And on the outside.
You can see the contacts and the first on the left is the high-speed contact. The second from left after the gap is the ground or negative. The one on the right is Positive (it has two connection posts), but I only used one.https://6066gmcclub.com/album.php?al...pictureid=4738

Here it is siliconed
https://6066gmcclub.com/album.php?al...pictureid=4739
And this is the specific silicon I used
https://6066gmcclub.com/album.php?al...pictureid=4740

Welps put the domain in too but can't seem to get the **** pics to take???
You can look attem in my only album