Re: Not getting power to coil
 

And I guess these electronic ignitions do not have condensers.

Re: Not getting power to coil
 

Okay lemme go test the plug the way you said.

Re: Not getting power to coil
 

No condenser. Measure the gap between the black round piece and the little rectangular black box. Needs to be .030

Re: Not getting power to coil
 

Okay definitely no spark at plug.

Re: Not getting power to coil
 

TAKE OFF NEGATIVE BATTERY CABLE.....Measure the gap between the black round piece and the little rectangular black box. Needs to be .030. I'll stay with you at my computer. Tell me when you get tired and I will go eat dinner. Better faster to use email at this point. If you wish, PM your email address.

Re: Not getting power to coil
 

See next step above

Re: Not getting power to coil
 

Never really looked closely at these before. .030 does fit but a bit tight feels more like the .028 slid better. But does go.

Re: Not getting power to coil
 

Close enough. Check all the wires and their terminations. Then one final test before declaring the unit dead. I will post that in a minute.

Re: Not getting power to coil
 

From the Pertronix the red wire goes to the coil positive and the black wire goes to the coil negative they look solid. The positive on the coil also has the yellow and black wire that comes from the firewall.

Re: Not getting power to coil
 

I did send you my email in PM