Originally Posted by Prowbar (Post 75437)

You're correct regarding the ports. I'm still thinking about the PCV system conversion. On my IMPCO propane mixer air cleaner, I have a way to attach a PCV hose. Now to tap into the engine. Either convert the filter canister on the back of the block or use one of the valve covers. I don't like drilling holes in original parts, possibly a custom oil fill cap with a PCV hose fitting in the center.

What are your thoughts?

Originally Posted by James (Post 75438)

I'm thinking something like this:
https://www.summitracing.com/parts/sdk-c8az-6766-b

I don't know it this one will work. I would need to research this. It also seems to me that the later model V6 had this type of cap (or something similar) or maybe it was the Chevy that had it, I don't remember. Maybe someone else in the group know something about this.

Originally Posted by mcmyket (Post 75029)

Hello,

I have a 64 GMC with a 305 v6 that I've recently purchased and was considering a Holley Sniper 2300 fuel injection setup for it. I see there was a thread in 2020 talking about it, but I don't see where anyone has completed an installation. Has this setup or any other fuel injection system worked for anyone yet.

Thanks!

Mike

Originally Posted by anomalyjustin (Post 77724)

I'm running the 4bbl 4150 Sniper on my 60 GMC with the 305. I converted it over about 4-5 years ago and never looked back. Once you get the learn procedure completed and do a few tuning tweaks, it works great. Definitely invest the progressive linkage add on though. The throttle is really touchy without it.

Originally Posted by sclor (Post 77857)

Regarding pcv valve, I switched mine over to Ford setup used in the seventies. Don't remember exact application, but it shouldn't be too hard to find. Ford used them on their v8's. I was uncomfortable with middle cylinders running leaner under the original GMC factory system.

Hope that helps.
Regards
Steve
New Orleans

Originally Posted by Prowbar (Post 77871)

I like your solution. Tried the external PCV setup before but didn't succeed. Going to try it with a PCV valve on intake vacuum. I assume that is what you connected the hose to?