6066 (1960-1966) GMC Truck Club
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)
-   Builds and Journals (https://6066gmcclub.com/forumdisplay.php?f=16)
-   -   New to the forum... (https://6066gmcclub.com/showthread.php?t=51156)

Ed Snyder July 4th, 2021 02:19 AM
Re: New to the forum...
 
Quote:
Originally Posted by cowboygunner (Post 74280)
I stand corrected. Looks like it is the standard 351. Should there be a number behind the stamp (serial or engine number)? Just wondering...
Original engines had a serial number stamped after the engine size, but a lot of the replacement engines did not. You've got either a "C" engine, or an "E" engine. The C would be a non-Magnum engine with a rectangular carburetor mounting bolt pattern. The E is a Magnum engine with bigger intake and exhaust ports and a trapezoid-shaped carb bolt pattern. Now I'm curious which engine you have!

LEWISMATKIN July 4th, 2021 02:27 AM
Re: New to the forum...
 
ed, judging from the picture of the engine, it having the
"WW" stromberg, it is either built to the std. or the "C" configuration.

Ed Snyder July 4th, 2021 02:31 AM
Re: New to the forum...
 
Quote:
Originally Posted by LEWISMATKIN (Post 74284)
ed, judging from the picture of the engine, it having the
"WW" stromberg, it is either built to the std. or the "C" configuration.
You're right, Lewis. The 351E would have a WWC Stromberg, not the WW.

cowboygunner July 4th, 2021 12:24 PM
Re: New to the forum...
 
2 Attachment(s)
The carb bolt pattern is rectangular - either a standard or the C. Thank you Ed and Lewis!

cowboygunner July 4th, 2021 12:30 PM
Re: New to the forum...
 
1 Attachment(s)
Was able to decode the VIN as well...so this would be a "K1500?"

LEWISMATKIN July 4th, 2021 07:46 PM
Re: New to the forum...
 
Decoder is wrong. K=4wd; 1502= 3/4 ton long w/b; C=plant truck is built in; j=1962 model; 2536=actual number of truck produced on this production line

Ed Snyder July 5th, 2021 01:06 AM
Re: New to the forum...
 
Quote:
Originally Posted by LEWISMATKIN (Post 74290)
Decoder is wrong. K=4wd; 1502= 3/4 ton long w/b; C=plant truck is built in; j=1962 model; 2536=actual number of truck produced on this production line
Not sure where you got that decoder, Cowboy, but Lewis is right. You can find more info on Jolly's site here --

To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?



One more thing -- you might want to change your truck ID in the upper right corner of your posts to say "3/4 ton" rather than "1/2 ton".

Funky61 July 5th, 2021 01:22 AM
Re: New to the forum...
 
That decoder is something new I recently found on the a Jolly Site



To view some links or images in this forum your post count must be 1 or greater. You currently have 0 posts. Maybe you should introduce yourself with a new topic?

Jeannie July 5th, 2021 07:40 PM
Re: New to the forum...
 
Quote:
Originally Posted by LEWISMATKIN (Post 74290)
Decoder is wrong. K=4wd; 1502= 3/4 ton long w/b; C=plant truck is built in; j=1962 model; 2536=actual number of truck produced on this production line
Hi Lewis!

You are right about the tonnage. The VIN decoder had a duplicate output for half ton pickups, indicating both the 1500 and the 2500 as half ton models. This is now corrected. However, to my knowledge and per Jolly's research the designation for wideside or stepside was never coded into the VIN for GMC. If this is wrong and you have the decoding for this we can add it to the decoder.

Thanks!

-Jeannie
6066 GMC Club

cowboygunner July 5th, 2021 10:55 PM
Re: New to the forum...
 
Thank you all for the flow of information! Looks like I found the right forum. Have a great evening!


All times are GMT +1. The time now is 08:58 AM.
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.