6066 (1960-1966) GMC Truck Club - Need advice on a dash, see pick

Page 2 of 2

Show 40 post(s) from this thread on one page

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)

- Interiors, Dash, Lights and Electrical (https://6066gmcclub.com/forumdisplay.php?f=15)

- - Need advice on a dash, see pick (https://6066gmcclub.com/showthread.php?t=49754)

Ed Snyder

December 7th, 2016 07:03 AM

Re: Need advice on a dash, see pick

Quote:

Originally Posted by bigblockv6 (Post 65180)

Ed, I totally screwed up I must have been suffering from dyslexia earlier:pullinghairout::banghead:, I really meant if you got the clock and Tach combo then the clock would be on the right and the Tach would be on the left:ok:

I wonder if any of the plants in any of the years 62-66 reversed them with the tach on the right and/or the clock on the left. Anybody have evidence of that?

Lineman

December 7th, 2016 04:05 PM

Re: Need advice on a dash, see pick

Man you guys are too cool. It's a lot to keep up with.

Somebody gave the advice to clean mine up and go with what I have there as my dash is about right and the tach is at least period correct. Will that tach need the box on the firewall to make it work?

Think that dash will clean up back to original?

Oh, I forgot to mention that truck had a "Motor Minder" vacuum gauge up on top of the dash to the left also. I bought a NOS or at least a nice one to replace it. Did GMC do any stuff like that?

Also a gentleman stated along the way I may actually have a 1 Ton, somebody painted over the kick panel tag. So he may be right? Is there any easy way to tell?

I don't speak in absolutes for a reason.

I am going to try to start posting some picks and I will need help with parts, please keep your eye open for that.

Thanks again for all the help.

Jay

Ed Snyder

December 7th, 2016 04:16 PM

Re: Need advice on a dash, see pick

Quote:

Originally Posted by Lineman (Post 65182)

Man you guys are too cool. It's a lot to keep up with.

Also a gentleman stated along the way I may actually have a 1 Ton, somebody painted over the kick panel tag. So he may be right? Is there any easy way to tell?

I don't speak in absolutes for a reason.

Thanks again for all the help.

Jay

If your VIN starts with a "15", you've got a 3/4 ton. If it starts with a "25" you've got a one ton.

bigblockv6

December 8th, 2016 02:54 AM

Re: Need advice on a dash, see pick

Quote:

Originally Posted by Ed Snyder (Post 65181)

I wonder if any of the plants in any of the years 62-66 reversed them with the tach on the right and/or the clock on the left. Anybody have evidence of that?

Maybe if the gauges were dealer installed that could have happened, never really saw them in opposite order. When my Father got his 62 K1000 which he special ordered the truck came from the factory with the clock on the right and the gauge pod was cut from the factory not exposing the chrome bezel on the clock which really gave it a factory appearance:thumbsup: He had the dealer install the Bat-O-Meter to fill in the blank spot on the left.

Sponge

December 21st, 2016 05:41 PM

Re: Need advice on a dash, see pick

Quote:

Originally Posted by Ed Snyder (Post 65178)

I think whether the tach was on the right or the left must have varied depending on which plant the truck came from. As you can see in this photo, the tach in the one ton Suburban my Dad bought new is mounted on the left with the clock on the right.

Sir,

What is the knob on the left side of the ignition switch?
I had a switch on mine but Nothing was connected to it.

Thanks;

Ed Snyder

December 21st, 2016 07:10 PM

Re: Need advice on a dash, see pick

Quote:

Originally Posted by Sponge (Post 65490)

Sir,

What is the knob on the left side of the ignition switch?
I had a switch on mine but Nothing was connected to it.

Thanks;

The knob on the left side of the ignition switch with the "T" on it is the hand throttle, an option from the factory. I usually use it in conjunction with or instead of the choke during engine warm-up. It's a quick way to adjust idle speed. The more common use, I'm sure, was for trucks with something driven by a PTO, such as a winch or a hydraulic hoist, to boost RPMs while the truck was not being driven down the road.

On a level road it could also be used as a poor man's cruise control.

All times are GMT +1. The time now is 02:47 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page