6066 (1960-1966) GMC Truck Club

6066 (1960-1966) GMC Truck Club (https://6066gmcclub.com/index.php)
-   Builds and Journals (https://6066gmcclub.com/forumdisplay.php?f=16)
-   -   1964 GMC "crustine" semi-build. (https://6066gmcclub.com/showthread.php?t=48773)

Jmclendon January 5th, 2017 06:23 AM

Re: 1964 GMC "crustine" semi-build.
 
Can y'all send some of that cold weather over my way? LOL

I'm sure I'd change my tune pretty quickly if I was living in it again. But, there are times where I really miss the snow.

Ed Snyder January 5th, 2017 08:00 AM

Re: 1964 GMC "crustine" semi-build.
 
Quote:

Originally Posted by TJ's GMC (Post 65762)
Ed, looks like Medford got it good too! You able to still get Up your driveway?

Our driveway here near Medford is a piece of cake compared to the driveway we endured for 25 years at our old place, Tom. That driveway was 2/3 mile long and gained 400' in elevation from the paved road up to our house. The worst part was a hairpin curve at the top of a section with a 25% slope. I lost traction many times over the years in the middle of that hairpin going uphill in the snow. Going downhill in the snow was even worse -- came close to going over the edge more than once, sliding on the packed snow.

One of my former co-workers came out one time in the summer for a department picnic and never came back. She called it the "driveway from heck"! One time we had a guy in a service van try to come up the driveway. Near the top of the steepest part he lost momentum, started spinning his rear wheels, put on the brakes, and started sliding backwards down the hill. And this was in the summertime. He evidently freaked out due to gaining speed backwards, cranked the wheel to put the rear of van into the uphill side of the slope instead of risking going over the edge on the downhill side. This promptly rolled the van over onto its side. That was an interesting extraction challenge for the wrecker that came out to rescue him!

Then there was the time I jackknifed a trailer going downhill at the hairpin....

TJ's GMC January 5th, 2017 03:31 PM

Re: 1964 GMC "crustine" semi-build.
 
Quote:

Originally Posted by Jmclendon (Post 65766)
Can y'all send some of that cold weather over my way? LOL

I'm sure I'd change my tune pretty quickly if I was living in it again. But, there are times where I really miss the snow.

I may need help with shipping costs. :teehee:

Quote:

Originally Posted by Ed Snyder (Post 65767)
Our driveway here near Medford is a piece of cake compared to the driveway we endured for 25 years at our old place, Tom. That driveway was 2/3 mile long and gained 400' in elevation from the paved road up to our house. The worst part was a hairpin curve at the top of a section with a 25% slope. I lost traction many times over the years in the middle of that hairpin going uphill in the snow. Going downhill in the snow was even worse -- came close to going over the edge more than once, sliding on the packed snow.

One of my former co-workers came out one time in the summer for a department picnic and never came back. She called it the "driveway from heck"! One time we had a guy in a service van try to come up the driveway. Near the top of the steepest part he lost momentum, started spinning his rear wheels, put on the brakes, and started sliding backwards down the hill. And this was in the summertime. He evidently freaked out due to gaining speed backwards, cranked the wheel to put the rear of van into the uphill side of the slope instead of risking going over the edge on the downhill side. This promptly rolled the van over onto its side. That was an interesting extraction challenge for the wrecker that came out to rescue him!

Then there was the time I jackknifed a trailer going downhill at the hairpin....

Wow! Now I can understand! If you have a driveway that makes you skid backwards during the Summer then it's BAD. haha

David R Leifheit January 5th, 2017 06:35 PM

Re: 1964 GMC "crustine" semi-build.
 
Quote:

Originally Posted by Ed Snyder (Post 65767)
Our driveway here near Medford is a piece of cake compared to the driveway we endured for 25 years at our old place, Tom. That driveway was 2/3 mile long and gained 400' in elevation from the paved road up to our house. The worst part was a hairpin curve at the top of a section with a 25% slope. I lost traction many times over the years in the middle of that hairpin going uphill in the snow. Going downhill in the snow was even worse -- came close to going over the edge more than once, sliding on the packed snow.

You did have one heck of a driveway.
But you also had one heck of a view. A lot of people would put up with such a driveway just for that view.

bigblockv6 January 5th, 2017 11:48 PM

Re: 1964 GMC "crustine" semi-build.
 
Quote:

Originally Posted by Ed Snyder (Post 65767)
Our driveway here near Medford is a piece of cake compared to the driveway we endured for 25 years at our old place, Tom. That driveway was 2/3 mile long and gained 400' in elevation from the paved road up to our house. The worst part was a hairpin curve at the top of a section with a 25% slope. I lost traction many times over the years in the middle of that hairpin going uphill in the snow. Going downhill in the snow was even worse -- came close to going over the edge more than once, sliding on the packed snow.

One of my former co-workers came out one time in the summer for a department picnic and never came back. She called it the "driveway from heck"! One time we had a guy in a service van try to come up the driveway. Near the top of the steepest part he lost momentum, started spinning his rear wheels, put on the brakes, and started sliding backwards down the hill. And this was in the summertime. He evidently freaked out due to gaining speed backwards, cranked the wheel to put the rear of van into the uphill side of the slope instead of risking going over the edge on the downhill side. This promptly rolled the van over onto its side. That was an interesting extraction challenge for the wrecker that came out to rescue him!

Then there was the time I jackknifed a trailer going downhill at the hairpin....

Ed, that old driveway of yours was definitely meant for a 4wd. I remember back in 2004 you warned me about it sine I was driving my Trans Am up it, it was already springtime but traction could have been a problem because the dirt was loose, I made it up ok though:lol:

Ed Snyder January 6th, 2017 07:28 AM

Re: 1964 GMC "crustine" semi-build.
 
Quote:

Originally Posted by bigblockv6 (Post 65788)
Ed, that old driveway of yours was definitely meant for a 4wd.

Pete -- during our 25 years there, our daily drivers were always 4WD vehicles and had 4 studded tires on them during the winter. I hate tire chains, so would shovel two tracks all the way down the driveway whenever it would snow more than a few inches. About 10 years ago I finally broke down and bought a Honda snowblower with tracks. Two cleared tracks + 4WD + studded tires usually got us up and down OK.

One of the first things I did after moving down off the mountain a year ago was sell the snowblower. Could have used it yesterday though!

Ed Snyder January 6th, 2017 07:32 AM

Re: 1964 GMC "crustine" semi-build.
 
1 Attachment(s)
Quote:

Originally Posted by David R Leifheit (Post 65782)
You did have one heck of a driveway.
But you also had one heck of a view. A lot of people would put up with such a driveway just for that view.

Yeah, we really miss that view, David. Here's a photo of it looking due south for anyone curious. The high point in the background is Dutchman Peak in the Siskiyou Mountain range, just north of the California border.

RustyNut January 7th, 2017 02:01 AM

Re: 1964 GMC "crustine" semi-build.
 
Ed,

I guess I forgot about the driveway. Wasn't THAT bad..... when your driving a rental that you could care less about.......

Ed Snyder January 8th, 2017 07:49 AM

Re: 1964 GMC "crustine" semi-build.
 
Quote:

Originally Posted by RustyNut (Post 65815)
Ed,

I guess I forgot about the driveway. Wasn't THAT bad..... when your driving a rental that you could care less about.......

We need to get you back out here again, Rusty, so you can see our new place.

TJ's GMC January 8th, 2017 04:13 PM

Re: 1964 GMC "crustine" semi-build.
 
And since I am not to far from Ed Rusty can stop by my place to. :ok:


All times are GMT +1. The time now is 05:35 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.